Model EC-4110-I EC-4110-ICON
Measuring modes Conductivity/TDS/Salinity/Temp./Concentration(EC-4110-ICON Only)
Range Conductivity 0.0 μS/cm~2000 mS/cm (depends on selected range); Auto or Fixed
Salinity 0.0 ppt~70.0 ppt
TDS 0 ppm ~ 19999 ppm ; 0.00~199.9 ppt
Temp. PT-1000/PT-100: -30.0~200.0°C ; NTC-30K: -30.0~130.0°C
Concentration 　 NaCl_28%:0~28%
HCl_18%:0~18%, HCl_39%22~39%
HNO3_30%:0~30%,HNO3_96%:35~96%
NaOH_24%:0~24%, NaOH_50%:15~50%
H2SO4_37%:0~37%,H2SO4_88%:28~88%
H2SO4_99%:89~99%
H2P04_35%:0~35%
User-Defined Concentration Table
(9temp.x9Concentration/Cond.matrix)
 
Resolutions Conductivity 0.1 μS/cm, 0.01mS/cm, 0.1mS/cm, 1mS/cm
Temp. 0.1°C
Concentration 　 0.01%
Accuracy Conductivity ± 1% (± 1 digit)
Temp. ± 0.2°C (± 1 Digit), Equipped with temperature error correction function
Temperature compensation Automatic with NTC 30KΩ/ PT-1000 /PT-100
Manual adjustment temp. compensation
Calibration mode (1) Manual cell-constant adjustment (2) Conductivity standard solution calibration
(3)Zero-point calibration
Production adjustment Factor: 0.7000~1.3000
Ambient temperature 0~50°C
Storage temperature -20~70°C
Cell constant Freely adjustable 0.008~99.999cm-1
Temperature coefficient Linear temperature compensation at 0.00%~40.00%,
Non-linear compensation and Off-compensation
Compensation Temperature Freely adjustable & setting for the specific temperature value: 0~200°C
Display Large LCM with sensitization sensor for auto/manual illumination function and contract function
Text mode: Numerical display
Chart mode: 3 mins real-time dynamic graph(Cond.& Concentration only)
Trace mode: Set up from 3 mins to four weeks duration of the measured value trend graph(Cond.& Concentration only)
Current output Isolated DC 0/4~20mA corresponding to measurement, max. load 500Ω
Serial interface RS-485(MODBUS RTU or ASCII)
Modbus communications Measuring value, calibration data, product adjustment, logbook, parameter readout & selection
Logbook 50 event records for important events & diagnostic error records
Setting Contact 240VAC, 0.5A max. (recommend)
Activate Hi/Lo, Hi/Hi, Lo/Lo selectable two limited programmable, ON/OFF
Contact Contact 240VAC, 0.5A max. (recommend)
Activate ON: 0~99min.59sec. / OFF:0~999 hours59min.
Power supply 100~240VAC±10%, 7W Max., 50/60 Hz
Installation Wall or pipe or panel mounting
Dimensions 96 mm x 96 mm x 132 mm (H x W x D)
Cut out dimensions 93 mm x 93 mm (H x W)
Weight 0.5 kg
Protection IP 65 (NEMA 4X)

· " 8-201-PFA-10 " 전 극 사 양 

Conductivity Cell
모델  8-201-PFA-10
측정범위  0-2000mS/cm
셀상수  2.7
온도전극  Pt 1000
사용온도  -20∼ 130℃
온도응답시간 10min
최대압력 16Bar
최소침적깊이 54mm
재질 Sensor Polyfluoroalkoxy(PFA)
Pin SUS316L
Sealing loop PTPE
O-ring FEP+Viton
Nut SUS316L
케이블길이  10 m

 · 제 품 도면

· " 8-201-PFA-10 " 전 극 도면 

 

 

저작자표시 비영리 변경금지

'수질계측기' 카테고리의 다른 글

불산(HF)함유 폐수공정 CON-4110-8-241-01 전도도 측정기 SUNTEX  (0) 2022.02.18
CON-4110-8-241 폐수공정전용 전도도 측정기 Process Wastewater SUNTEX  (0) 2022.02.15
CON-4110RS-8-244-10 공정용 전도도 측정기 Graphite전극 Process SUNTEX  (0) 2022.02.15
CON-4110-8-244-10 공정용 전도도측정기 Graphite전극 Process SUNTEX  (0) 2022.02.14
EC-4110-ICON/EC 전도도 측정기 8-201-PFA-10 Conductivity Sensor, SUNTEX  (0) 2022.02.14

+ Recent posts

티스토리툴바